- البريد الإلكتروني
- الهاتف
-
العنوان
North of West Wei 1st Road, Jingshi Road, Tianchang City, Anhui Province
Anhui Zhongchao Electric Co., Ltd
North of West Wei 1st Road, Jingshi Road, Tianchang City, Anhui Province
ZC760-EEF4A-W69WA 双Flange diaphragm level transmittercharacteristic
|
● High precision ● Range and zero point can be continuously adjusted externally ● Good stability performance Positive migration can reach 500%, negative migration can reach 600% ● Two line system Adjustable damping and overvoltage resistance Solid state sensor design |
No mechanical movable parts, low maintenance volume ● Lightweight (2.4kg) ● Unified structure and strong interchangeability across the entire series ● Miniaturization (166mm total height) The membrane material that comes into contact with the medium is optional ● Unilateral overpressure resistance Low pressure cast aluminum alloy shell |
ZC760-EEF4A-W69WA 双Flange diaphragm level transmitterIntelligent features:
Super measurement performance, used for pressure, differential pressure, liquid level, and flow measurement
● Digital accuracy: ± 0.25%
Simulation accuracy: ± 0.5% ± 0.1% F.S
● Full performance: ± 0.25F.S
Stability: 0.25% for 60 months
Range ratio: 100:1
Measurement rate: 0.2S
● Miniature (2.4kg) all stainless steel flange, easy to install
● Process connection is compatible with other products to achieve excellent measurement
● Achieved excellent cold and hot stability
Intelligent transmitter using 16 bit computer
Standard 4-20mA, with digital signal based on HART protocol, remote control
● Support upgrades to fieldbus and field control based technologies. ZC760-EEF4A-W69WA DualFlange diaphragm level transmitterThis provides a reliable measurement method to avoid direct contact between the measured medium and the isolation diaphragm of the transmitter.
The transmitter with remote transmission device is suitable for the following working conditions:
1. It is necessary to isolate the high-temperature medium from the transmitter.
2. The measuring medium has a corrosive effect on the sensitive components of the transmitter.
3. The tested medium solidifies or crystallizes due to environmental or temperature changes.
4. The replacement of the measured medium requires strict purification of the measuring head
5. Suspended liquid or high viscosity medium
6. The measuring head must be kept clean and hygienic.
7. Measurement of sealed pressure vessels.
Please consult the sales department or refer to our company's relevant ZC760-EEF4A-W69WA for specific selection dimensionsFlange diaphragm level transmitter
Double flange liquid level transmitter |
|||||
4 |
0-4~40KPa |
||||
5 |
0-40~250KPa |
||||
6 |
0-0.16~1MPa |
||||
7 |
0-0.4~2.5MPa |
||||
8 |
0-1.6~10.0MPa |
||||
code name |
output |
||||
E |
Non intelligent type (4-20mA output) |
||||
S |
Intelligent (HART protocol+4~20mA output) |
||||
code name |
structural material |
||||
flange joint |
Isolation diaphragm |
Fill with liquid |
|||
22 |
316SST |
316SST |
silicone oil |
||
S1 |
A remote transmission device |
Order according to Table I-VI |
|||
S2 |
Two remote transmission devices |
||||
code name |
Additional features |
||||
M1 |
0~100% linear indicator |
||||
M2 |
LED digital display |
||||
M3 |
LCD monitor |
||||
B1 |
Pipe bending installation plate |
||||
B2 |
Plate bending installation plate |
||||
B3 |
Pipe installation safety installation board |
||||
d |
Explosion proof type dII BT4 |
||||
i |
Intrinsic safety type iaIICT6 |
||||
4E |
S |
22 |
S2 |