مرحبا بكم العميل!

العضوية

التابير

مساعدة

التابير
Shanghai Shanmei Environmental Protection Equipment Co., Ltd
صمصنع مخصص

المنتجات الرئيسية:

instrumentb2bصمنتجات

Shanghai Shanmei Environmental Protection Equipment Co., Ltd

  • البريد الإلكتروني

    info@sanmecorp.com

  • الهاتف

  • العنوان

    No. 258 Fengcun Road, Qingcun Town, Fengxian District, Shanghai

ساتصل الآن

HSM series reversible hammer crusher

قابلة للتفاوضتحديث05/22
نموذج
طبيعة المصنع
المنتجين
فئة المنتج
مكان المنشأ

نظرة عامة

The HSM series reversible hammer crusher is very suitable for the production of mechanism sand using medium soft ores (such as limestone) as raw materials, with strong crushing capacity. The single machine finished product output can reach 300-400t/h, and can directly produce medium and coarse sand with a fineness modulus of 2.8-3.3 through one-time pass.

تفاصيل المنتج

Characteristics and technical advantages of HSM series reversible hammer crusher products

  • Low investment cost, energy-saving and consumption reducing

    If the HSM series reversible hammer crusher is used in the sand making system, and an open circuit system is adopted for production according to the raw material situation and product requirements, the circulating material conveying equipment and finished product screening equipment can be eliminated, saving investment and production costs. Due to its simple process and high yield, the system's unit energy consumption can be lower than that of a vertical shaft breaking system.

  • Good particle size and reasonable grading of finished products

    The particles are mostly cubic in shape. The content of needles and flakes is low, meeting the requirements of national first-class products. Reasonable particle size distribution can reduce the dosage of concrete cementitious materials (cement) and additives under the same conditions. The comparative industrial experimental results show that compared with ordinary machine-made sand, the cost per cubic meter of concrete can be reduced by 3-7% in production cost

  • Wide applicability

    The adaptability range for feed particle size is wider, and any particle size or combination of multiple particle sizes within the 0-90mm range can be fed in. According to market demand and changes, a certain level of coarse aggregate with poor market conditions can be selectively processed and converted into machine-made sand, thereby achieving flexible configuration of the final product on the production line.

  • Can switch production between sand for mortar and sand for concrete

    Equipped with a frequency converter, the fineness modulus of the finished product can be adjusted online according to needs. The opening size of the sand making machine's discharge grate plate can be selected to adapt to different materials and discharge particle sizes, enabling the switching production of sand for mortar and concrete.


Technical parameters of HSM series reversible crusher

model
Maximum feed side length (mm)
Processing capacity (t/h)
Rotor size (mm)
Motor power (kw)
HSM3979
120
180
1000x2000
450
HSM5567
220
210
1400x1700
500
HSM6363
280
250
1600x1600
630
HSM6387
280
360
1600x2200
900
HSM63102
280
390
1600x2600
1000
HSM63118
280
450
1600x3000
1200
HSM63134
280
510
1600x3400
1300

Note:

The production capacity of the listed equipment is based on the instantaneous sampling measurement results of medium hardness rocks. The above data is for reference only. Please contact our engineers for specific equipment selection for the project.